Property 19th-century solid brick house, garage converted into an office
Location Bingham, Nottingham NG13
Survey Thermal imaging damp survey
Client Homeowner

The problem

After building work to convert the garage, damp spots appeared on one wall, floor to ceiling but only within a strip about six feet wide, along with staining on a roof truss. The builder left the job. A roofer checked the new roof windows and found them correctly installed, but more than a year later the patches still read damp on a meter.

What our surveyor found

  • The earlier leak had stopped. Ceilings, exposed timbers and floors all read dry. The staining on the timber surrounds was historic.
  • Moisture was trapped inside the wall. Water from the earlier leak had got into the wall build-up and was held between the old solid brickwork, the new insulation and the dot-and-dab plasterboard. The adhesive dabs had soaked up moisture and were drying far more slowly than the surface.
  • The wall couldn’t breathe. The house was built with breathable materials. Later insulation, plasterboard and dense cement mortar (instead of lime) restrict how the wall dries out.
  • Roof drainage to watch. A concealed box gutter by the dormer and downpipes discharging onto lower roofs increase the risk of water backing up in heavy rain.

Our conclusion

This wasn’t a new leak or rising damp. It was residual moisture from the old leak, locked into a modern lining on an old breathable wall. Without opening it up, it could take a very long time to dry, and redecorating would simply cover it.

What we recommended

  1. Remove the affected plasterboard locally to expose the brickwork, insulation and adhesive dabs.
  2. Let the masonry dry and re-test before reinstating.
  3. Replace damp insulation and plasterboard, using more breathable, compatible materials suited to a solid wall.
  4. Keep the box gutter and outlets clear, and maintain the leadwork and window perimeter seals.

The takeaway

Fixing a leak doesn’t always fix the damp patch. When old solid walls are lined with modern materials, water that got in once can stay trapped for a long time. Finding that out saves paying for treatments that aren’t needed.

See our independent damp surveys in Nottingham.

Damp that won’t clear after building work? An independent damp survey finds out whether it’s still getting in or just trapped. Get a free quote.

Related Posts

Basement of a house being damp proofed
Case Study: Basement Water Ingress at a Commercial Building in Clerkenwell (EC1)

Prospective tenants needed to know if a Clerkenwell basement would stay dry before signing a lease. Here is what our survey found and the costed Read more

Case Study: Fungus Growing Behind Skirting Boards in Richmond (TW9)

Mushrooms appeared between the floor and skirting in a Richmond kitchen with underfloor heating. Here is how our survey narrowed down the likely hidden leak.

Case Study: Drain Smell in a Fulham Flat That Wouldn’t Go Away After a Leak Was Fixed (W6)

A tenant in a Fulham flat still had a drain smell in her bedroom after the leak upstairs was repaired. Here is what our surveyor Read more